精选必中24码

的设计与研发 Focus on the design and development of FRP purification tower

Acid mist purification tower / exhaust gas treatment tower / exhaust gas absorption tower

Longkang FRP purification tower manufacturers
Position: home > Industry News >

What are the characteristics and cleaning steps of the acid mist purification tower?

Release date: 2019/01/21 10:48 Follow times:

的特性和清洁程序的详细描述酸雾净化塔,又称酸气净化塔、酸雾净化塔、酸雾吸收塔、 废气净化塔玻璃钢酸雾净化塔 ,起到消除废气中有害气体的作用。 Detailed description of the characteristics and cleaning procedures of acid mist purification tower Acid mist purification tower, also known as acid gas purification tower, acid mist purification tower, acid mist absorption tower, exhaust gas purification tower , fiberglass acid mist purification tower The role of gas. FRP acid mist purification tower has the characteristics of wide application range, high purification efficiency, small equipment resistance, small footprint, etc. It is currently the most ideal acid and alkali purification equipment with high concentration and high temperature at home and abroad. Frequency instrument, daily cleaning is more convenient. Very important.
Characteristics of acid mist purification tower
Acid mist purification tower, also known as acid gas purification tower, acid mist purification tower, acid mist absorption tower, exhaust gas purification tower, glass fiber reinforced plastic acid mist purification tower, plays a role in eliminating harmful gases in exhaust gas. It has a wide range of applications, high purification efficiency, small equipment resistance, and small footprint.
(1) Product Features
1. Dust type: acid mist, corrosive gas dust removal, desulfurization, ammonia dust removal.
2. Air handling capacity: 2000 m3 / h to 50,000 m3 / h
three. Filtration efficiency: 80% -95%
4. Maximum working temperature: 88 degrees Celsius, pressure 0.38 MPa
5. Material: PVC, PP board, PE board
6. Strong corrosion resistance of equipment
(2) Application
It is widely used in the absorption and purification of exhaust gas and exhaust gas in the production process of chemical, pharmaceutical, petroleum and other industries. Pharmaceutical industry: filtration of medicinal solution, serum, distilled water, biological products, compressed air, and various gases.
Food industry: filter beverages, mineral water, purified water, beer, wine, rice wine, rice wine, rice wine, white wine, fruit wine, syrup, compressed air, various gases and other liquids.
Electronics industry: Pre-filtration of reverse osmosis water system, pre-filtration of deionized water, precision filtration, filtration of magnetic media, filtration of general production process solutions.
Chemical industry: organic capacitors, inks, chemical reagents, photographic reagents, plating solutions.
Machinery industry: precision metal sheet liquid filtration, bearing metal sheet foam clean filtration.
Petroleum industry: water injection well filtration.
Automotive industry: Oil and gas filtration.
Environmental protection: waste gas treatment, wastewater fine filtration.
1. When the user installs the acid mist purification tower, the concrete foundation construction should be performed on the concrete foundation above 150 mm above the ground. Pumps and fans shall be made of concrete foundation as required.
2. During transportation and installation, care should be taken to protect the product from damage to the body and components.
three. When the purification tower leaves the factory, it is packaged and transported in sections according to specific conditions. Tianqing environmental protection technicians will go to the site for installation and commissioning.
Chapter Four. If an acid mist purification tower is used outdoors, anti-freezing measures should be taken in the tower bottom pond in winter.
5. There is a liquid level mark on the bottom of the equipment pool. Before use, the absorption liquid must be injected according to the liquid level mark. Pay attention to supplement the absorption liquid during use.
6. When using a purification tower, the circulating water pump should be turned on for 2-3 minutes before the fan starts. When stopping the wind, the fan should be stopped for 1-2 minutes before stopping the circulating water pump.
Chapter VII. The acidity of the liquid in the bottom tank of the tower body and the purification degree of the exhaust gas should be regularly checked according to the operating conditions, and the adsorption liquid in the bottom tank should be replaced when it exceeds the standard.
8. Please note that the user service of the acid mist purification tower has an annual maintenance of one and a half to two years, check the filling of the disc sprinkler pipe and the filler, and clean it.
2. Detailed cleaning procedure of FRP acid mist purification tower
At present, the glass fiber reinforced plastic acid mist purification tower is the most ideal high-concentration, high temperature acid and alkali purification equipment at home and abroad. It plays a very important role in the development of the enterprise. The glass fiber reinforced plastic acid mist purification tower is used by more and more people. As a high-frequency instrument, the purification tower is very important for daily cleaning. Here we share the cleaning steps of FRP acid mist purification tower:
1. When the user installs the acid mist purification tower, the concrete foundation construction should be performed on the concrete foundation above 150 mm above the ground. Pumps and fans shall be made of concrete foundation as required.
2. During transportation and installation, care should be taken to protect the product from damage to the body and components.
three. When the purification tower leaves the factory, it is packaged and transported in sections according to specific conditions. Tianqing environmental protection technicians will go to the site for installation and commissioning.
4. If an acid mist purification tower is used outdoors, anti-freezing measures should be taken in the tower bottom pond in winter.
5. There is a liquid level mark on the bottom of the equipment pool. Before use, the absorption liquid must be injected according to the liquid level mark. Pay attention to supplement the absorption liquid during use.
6. When using a purification tower, the circulating water pump should be turned on for 2-3 minutes before the fan starts. When stopping the wind, the fan should be stopped for 1-2 minutes before stopping the circulating water pump.
7. The acidity of the liquid in the bottom tank of the tower body and the purification degree of the exhaust gas should be regularly checked according to the operating conditions, and the adsorption liquid in the bottom tank should be replaced when it exceeds the standard.
8. Please note that the user service of the acid mist purification tower has an annual maintenance of one and a half to two years, check the filling of the disc sprinkler pipe and the filler, and clean it.