精选必中24码

的设计与研发 Focus on the design and development of FRP purification tower

Acid mist purification tower / exhaust gas treatment tower / exhaust gas absorption tower

Longkang FRP purification tower manufacturers
Position: home > Industry News >

Protection method of FRP purification tower in operation

Release date: 2019/03/16 10:17 Follows:

的运行它是一种控制二氧化硫排放的产品。 How to protect the operation of glass fiber reinforced plastic purification tower It is a product to control sulfur dioxide emissions. The dust collector can not only remove sulfur dioxide in the flue gas, but also produce high value-added ammonium sulfate fertilizer products. What should be paid attention to when maintaining the desulfurization dust collector?
First: When the glass fiber reinforced plastic purification tower is operating, the airflow in the body forms a vortex. Once a vortex is formed, it is almost impossible to eliminate it. Especially when the temperature and speed of the dust-containing gas changes and the pipe wall may be condensed, it is necessary to periodically clean the dust removal pipe.
2. Bolt or other fastening devices are used between the cover of the cleaning hole and the wall of the FRP desulfurization dust collector. A rubber plate or a rubber band is used as a backing between the cover plate and the dust collector.
three. The cleaning hole of the dust collector should be located on the side or upper part of the pipe. All cleaning holes must be sealed.
4. Difficult operation management, difficult to control water level, low water level can not reach the dust removal effect, high water induced draft fan water, acid and alkali neutralization is easy to control.
Fifth: Due to the large unit steel consumption of the dust collector, the best way to install the dust collector is to gradually reduce the thickness of the material from the upper part of the cylinder, so that it can be better maintained.
Next, we will analyze the excellent products of FRP purification tower.
1. The most basic function of FRP purification tower is cooling and heating. However, the difference between the central air conditioner and the integral disc spring is that the glass fiber reinforced plastic purification tower can cooperate with the fresh air system to obtain the freshness and freshness of the internal and external ventilation protection gas.
three. The appearance of the glass fiber reinforced plastic purification tower can not avoid destroying most of the decoration style. The covering device of the glass fiber reinforced plastic purification tower can be better combined with home decoration, which is suitable for any style.
4. The energy consumption of the FRP purification tower when multiple integral disc springs are opened at the same time is not much different from that of the FRP purification tower, and because the energy consumption of the FRP purification tower can be controlled by zones, compared with large residential buildings, Higher consumption. The glass fiber reinforced plastic purification tower is not much different from the integral disc spring. The larger the house, the higher the installation cost of the FRP purification tower, and the more energy efficient it is.
5. Decontamination funds The overall disc spring decontamination of the glass fiber reinforced plastic purification tower is very random. Almost as long as a random decontamination filter is implemented. If the central air-conditioning system of a commercial building is used, it should also distinguish between the simplicity and convenience of cleaning. When the glass fiber reinforced plastic purification tower tells you that in the central air conditioning of the commercial building, the fluorine system can be cleaned at will, as long as the filter can be cleaned at will, and the glass fiber reinforced plastic purification tower needs to clean the pipes. Achieving this goal is difficult and expensive.
6. Early investments were much more expensive than early investments in FRP purification towers and integral disc springs.
7. The service life of FRP purification tower is about 15-20 years, and the service life of the overall disc spring is about 8-10 years.