精选必中24码

的设计与研发 Focus on the design and development of FRP purification tower

Acid mist purification tower / exhaust gas treatment tower / exhaust gas absorption tower

Longkang FRP purification tower manufacturers

Problems that glass fiber reinforced plastic purification tower may encounter during production

Release date: 2018/12/21 10:25 Follows:

What problems may be encountered in the production of FRP purification towers ? FRP purification towers use flame-retardant vinyl unsaturated resins as bases, and alkali-free and non-twisted glass fibers as reinforcing materials. They have high strength, simple structure, Easy to manufacture, small footprint, high purification efficiency.
In addition to the five application fields of glass fiber reinforced plastic purification towers, there are also varying degrees of application in the fields of papermaking, leather, food, ventilation and other fields. Applications need to be further developed.
Waste heat or cooling processes in industrial processes are usually guided by cooling water. The function of FRP is to heat the air in the waste heat absorption tower and transfer the waste heat of the cooling water to the air and the atmosphere. For example, in power plants and boilers, water is heated to very high temperatures. Temperature and high-pressure steam drive a turbine generator to generate electricity. The exhaust gas of the glass fiber reinforced plastic purification tower enters the condenser after work, condenses into water and coolant water for heat transfer, and then the water pump returns to the boiler for circulation. Insufficient memory will be caused by the flood.
Application scope of FRP purification tower: It is mainly used in air-conditioning cooling system, refrigeration series, injection molding, tanning, foaming, power, steam turbine, aluminum processing, air compressor, industrial water cooling and other fields. Plastic chemical industry. Reese.
There are also many requirements for the installation of FRP purification towers. Here is a detailed explanation for you.
1. Protect the product during transportation and installation, and do not touch any physical damage or parts.
2. When the factory is purifying, it can be transported by subcontracting according to the specific conditions, and environmental protection technicians who clean up during the day can install it on site.
three. When the user installs a glass fiber reinforced plastic purification tower of more than 150 mm, the fan should be another concrete foundation on the basis of the concrete pump.
4. If you use it outdoors, you should take antifreeze measures on the bottom of the glass fiber reinforced plastic purification tower pool in winter.
5. This device is a horizontal mark at the bottom of the pool and is used to absorb liquid according to the mark before the liquid. When using, pay attention to replenishing the absorbed liquid.
6. When in use, the purification tower should first turn on the circulation pump for 2 to 3 minutes, then start the blower, turn off the blower for 1 to 2 minutes, and then stop the circulation pump.
7. According to the depth of the tank at the bottom of the tower and the degree of purification of the exhaust gas when the acidic liquid is used, periodically check whether it exceeds the standard and replace the solution in the bottom absorption tank.
8. 进行一年半到两年的维护保养,检查盘片装填、喷淋管及包装,并清洗干净。 Please note that the glass fiber reinforced plastic purification tower is used in customer service for one and a half to two years of maintenance, check the disc loading, spray pipe and packaging, and clean.