精选必中24码

的设计与研发 Focus on the design and development of FRP purification tower

Acid mist purification tower / exhaust gas treatment tower / exhaust gas absorption tower

Longkang FRP purification tower manufacturers
Exhaust gas recovery tower

Exhaust gas recovery tower

Release time: 2018-07-07 15:38

Page views: Times

product description

Precautions for using exhaust gas recovery tower
1. When using the absorption tower, first check whether the pipeline valves of each system of the equipment are intact, whether the selection and ratio of the absorbing liquid agent are correct, and if the absorbing liquid fails to meet the specified requirements, it must be replenished in time. When starting up, the water pump should be turned on for 3-5 minutes before turning on the fan. When closing this purification system, the fan should be turned off for 2-3 minutes before the water pump is turned off. Do not turn it on randomly, otherwise the motor will be burned and the packing will be blocked, affecting the purification effect.
Exhaust gas recovery tower
2. For the connection of the fan and water pump of the purification tower, it is not allowed to move randomly. It is absolutely necessary to ensure that they are turned correctly and must not be reversed, otherwise the motor will be damaged and an accident may be caused.
3. After the equipment is delivered and delivered, the user unit shall send a special person to keep it for use. Periodic inspections will reveal abnormal noise or water leaks from the equipment. It shall be shut down and repaired before use.
4. The equipment is installed outdoors, and the pump fan motor should be made of rain cover to prevent the motor from getting wet. Equipment regardless of security